How to do Tplink Repeater Login?
Introduction
TP-Link wifi repeater is a great buy for the user looking for simple functionality and easy setup. It takes a few minutes to get it up and running via a web-based method. Just type tplinkrepeater.net in your computer’s browser and log in to the extender’s interface. Once logged in, you can configure a range of extender settings. In this article, you’ll learn how to do the Tplink repeater login and reset your extender.
Below are the steps to access the tplinkrepeater.net login page
Step 1: Place the tplink extender near a power source as well as your main router. Plug the extender into a power outlet and switch on the power supply.
Step 2: Use the Ethernet cable to connect your extender with any of your wireless devices. You can use a computer device to perform the tplink repeater setup process.
Step 3: From your PC, launch a browser and type tplinkextender.net or tplinkrepeater.net in the browser’s address field. In case, you are unable to get access to the tplink login page using the default gateway, try using the tplink repeater login default IP i.e. 192.168.1.254.
Step 4: Next, you would be prompted to enter the default login details of your extender. The default login details of the tplink extender are printed on its back panel.
Step 5: Log in with the default username and password to open the basic home page of your tplink wifi extender.
Step 6: Now, scan for the available networks and choose your main router’s network name that you want to extend. Connect to the main router’s network name by typing the wireless password.
Step 7: In the next step, you can configure the wireless security settings of your extender. Change the tplink wireless name and password under the Wireless section. Also, choose the best security mode and encryption key such as WPA2/WPA2-PSK to keep your network secure.
Step 8: Once done, click on the Apply tab to save the customized settings. Now, you can place your tplink wireless repeater where you need network coverage at your home.
In case, you face any issues during the whole process or the tplink repeater not working, you can try a few simple fixes to resolve those issues.
Troubleshooting steps to reset the tplink range extender
● You can fix the tplink repeater login issues by resetting your repeater to the factory defaults. For this, locate the reset button on the extender.
● Now, take a paper clip and press the reset button on the repeater with it.
● Hold the button until the power LED on the tplink device starts to blink.
● After 10–20 seconds, release the button and wait for your extender to reboot.
● Once done, you need to perform the tplinkrepeater.net setup process again.
Conclusion:
We hope that this article helped you complete the tplink extender login process. If you have any more queries then you can ask our technical executives on their helpline number. Our technical experts are always available to help you fix your repeater issues. For more details, you can chat online with us via a live chat window provided here.
